Acer H235HL Manuale Utente Scaricare il pdf (Pagina 19)

English

Installation

To install the monitor on your host system, please follow the steps below:

Steps

1 Connect the video cable

a Make sure both the monitor and computer are switched off.

b Connect the VGA video cable to the computer.

c Connect the digital cable

(1) Make sure both the monitor and computer are switched off.

(2) Connect one end of the 24-pin DVI* cable to the back of the

monitor and the other end to the computer's port.

(3) Connect one end of the 19-pin HDMI* cable to the back of the

monitor and the other end to the computer's port.

2 Connect the power cord

Connect the power cord to the monitor, then to a properly grounded AC

outlet.

3 Turn on the monitor and computer

Turn on the monitor first, then the computer. This sequence is very

important.

4 If the monitor does not function properly, please refer to the

troubleshooting section to diagnose the problem

* for selected models

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Nessun commento

Acer H235HL Manuale Utente Pagina 19